KLEEN BRITE INSTRUCTIONS

 

Note:  All components are color coded for convenient use.  Kleen Brite will not overcome the effects of seriously degraded, crystallized, aged or neglected plastic.   Kit contains adequate supplies for 30 headlight applications.   Read complete Instructions before use.

 

CAUTION

Read Caution statement on each dispenser bottle prior to use.  Use only on external surfaces, not interior lamp surfaces. Use rubber gloves provided if skin sensitivity exists.

 

 

1.  CLEAN  Apply  3 - 5 sprays of CLEANER from the red dispenser bottle to fully moisten the entire headlight lens.   Remove the red  pad labeled CLEANER PAD and spread the CLEANER on the lens for 30 seconds (spread with gentle pressure). Observe stains and discoloration will dissolve.  When finished, wash liberally with fresh clean water.  Leave surface damp.          

 

2.   POLISH  Remove the blue pad labeled POLISHING PAD.   Select the blue dispenser bottle  POLISHER and shake well, then apply a dime size amount of POLISHER  onto the  blue pad. Using firm pressure in a circular motion, buff/polish the lens with the POLISHING PAD until the POLISHER has dried to a noticeable  white haze.  The more you polish, the better the result.

 

3. PROTECT   Apply 3 - 5 sprays of CONDITIONER from the green dispenser bottle onto the headlight lens.  Remove the green sponge labeled APPLICATOR SPONGE and use a sweeping motion to gently spread the CONDITIONER on the surface of the headlight lens for 30 seconds.  Use blue DRYING TOWEL with  light pressure to wipe surface completely dry.

 

 

 SUGGESTIONS

a)  For best results, complete the process in the shade out of direct sunlight. b) Do not discard the re-sealable clear plastic container - save for future storage.  c) Replace the Pads, Drying Towel, and Applicator Sponge to their respective re-sealable plastic storage bags for future applications.   d) Maintain your  lenses  by repeating the application every 6 months.  Frequent  exposure to road salts may require more frequent application. Garage kept vehicles will require less frequent maintenance applications.  e) Ideal for varied uses wherever plastic has deteriorated . . .  around the house, on boats, cars, trucks,  and commercial/industrial applications. 

 

  

Customer Service and technical assistance:

Toll Free 800.327.6548

Home Page About Us Application Guide Instructions FAQ

©2000 Kleen Wheels Corporation. All rights reserved.
For Comments or Questions please send us an email or 
call us Toll Free: 800-327-6548 9-4 EST.
Fax (954) 791-9116