WHEEL MATES
INSTANTLY PROVIDES CLEAN & NEW WHEEL MOUNTING SURFACE!
INSTALLATION INSTRUCTIONS:
1. Follow manufacturers instructions to safely remove the wheel.
2. Visually inspect the surfaces which will contact the disc. They should be flat, smooth, and clean. Components should not have paint build-up or runs. All parts should have dirt, rust, and loose paint removed from the mating surfaces.
3. Place the Wheel Mate over the studs (*Note: it does not matter which side faces out when installed!) and push it completely on so it is seated firmly against the hub flange or brake rotor/drum. (The discs are designed to be self-centering.)
4. Replace the wheel following the manufacturers installation instructions.
*The disc may be reused as long as it maintains its' original shape and integrity.
Do not reuse any disc that has been damaged in any way.